Advertisement
Prior to installa�on
Make sure you have all necessary parts by checking the diagram and parts list. If any
part is missing or damaged, please contact our Customer Service.
Turn off the hot and cold water supply at the angle stops and turn on the old faucet
to release any built up pressure. Remove exis�ng faucet. Clean sink or countertop
to remove any debris, plumber's pu�y, or silicone.
Flush angle stops to release any debris prior to installa�on.
Pre-drilled hole size requirement: 1-3/8" (min)
Max countertop thickness: 1- 3/8"
You may need
Silicone Sealant
Cleaning and care
Care should be given to the cleaning of this product. Although its finish
is extremely durable, it can be damaged by harsh abrasives or polish.
To clean, simply wipe gently with a damp cloth and blot dry with a so�
towel.
Read all instruc�ons prior to installa�on
Failure to read these instruc�ons prior to installa�on may result in
personal injury, property damage, or product failure. Manufacturer
assumes no responsibility for product failure due to improper
installa�on.
Plumbing Tape
Protec�ve Goggles
CAUTION
1-1/2" (max)
–
Screwdriver
3
Wrench
Advertisement
