Watching Computer Images With A Wide Screen - NEC PlasmaSync 5000W User Manual

Watching computer images with a
wide screen
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
When "PICTURE SIZE" is set to "ON":
1. Press the "WIDE / AUTO WIDE" button on the re-
mote controller.
2. Within 3 seconds ...
Press the "WIDE/AUTO WIDE" button again.
The screen size switches as follows:
NORMAL FULL
NORMAL size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer im-
age.
FULL size screen
The image is expanded in the horizontal direction.
When using a graphic accelerator board that is capable of
displaying 848 480 or 1360 765.
FULL size screen
When "PICTURE SIZE" is set to "OFF":
The screen size switches as follows:
TRUE FULL
TRUE size screen (VGA, SVGA 4:3)
The image is true resolution.
FULL size screen
The image is expanded in the horizontal and vertical
direction.
When using a graphic accelerator board that is capable of
displaying 848 480.
TRUE
The image is true resolution.
FULL
Information
Supported resolution
• See page 50 for details on the display output of the various
VESA signal standards supported by the monitor.
• When 852 dot 480 line wide VGA (*) signals with a vertical
frequency of 60 Hz and horizontal frequency of 31.72 kHz
are input, select "WIDE" for the "RGB SELECT" setting.
Since selecting an 848 480 signal automatically displays
the image in correct size, it is not necessary to change the
RGB SELECT setting.
* "IBM PC/AT" and "VGA" are registered trademarks of IBM,
Inc. of the United States.
16