Table of Contents
Advertisement
Adjusting the Position, Fine Picture and Picture
Adj of a computer image
When a computer image is displayed, the position of the
image can be adjusted and flickering of the image can be
corrected.
Example: Adjusting the vertical position in the normal
mode
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "SCREEN", then
press the "OK" button.
The "SCREEN" menu appears.
2. Use the
and
buttons to select "RGB ADJ.", then
press the "OK" button.
S C R E E N
WIDE ADJ.
RGB ADJ.
OSM ADJ.
RETURN
EXIT
The "RGB ADJ." screen appears.
3. To adjust the normal mode ...
Use the
and
buttons to select "NORMAL".
The mode switches as follows when the
tons are pressed:
PICTURE SIZE : ON
NORMAL
FULL
R G B A D J .
MODE
:
NORMAL
V–POSITION
H–POSITION
FINE PICTURE
PICTURE ADJ.
RETURN
EXIT
* The mode can also be switched by pressing the
"WIDE/AUTO WIDE" button on the remote control-
ler.
OK
and
but-
PICTURE SIZE : OFF
TRUE
FULL
OK
4. To adjust the vertical position ...
Use the
and
buttons to select "V-POSITION".
R G B A D J .
MODE
V–POSITION
H–POSITION
FINE PICTURE
PICTURE ADJ.
RETURN
EXIT
5. Adjust using the
V–POSITION
* If neither the
or
onds, the current adjustment is set and the previous
screen reappears.
To continue making other computer image adjustments
...
Repeat from step 4.
6. Press the "OK" button.
The vertical position of the computer's image has now
been adjusted.
MODE
V–POSITION
H–POSITION
FINE PICTURE
PICTURE ADJ.
RETURN
EXIT
7. Once all adjustments are completed ...
Press the "MENU" button.
All menus disappear.
26
:
NORMAL
OK
and
buttons.
button is pressed within 5 sec-
R G B A D J .
:
NORMAL
OK
Advertisement
Table of Contents
