Watching Computer Images With A Wide Screen - NEC PlasmaSync 42MP3 User Manual

Watching computer images with a
wide screen
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
1. Press the WIDE button on the remote control.
2. Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
NORMAL FULL
NORMAL size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer
image.
FULL size screen
The image is expanded in the horizontal direction.
When wide signals are input.
FULL size screen
Information
Supported resolution
See page 51 for details on the display output of the
various VESA signal standards supported by the
monitor.
When 852 (848) dot
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
Select an appropriate setting for RGB SELECT mode
referring to the"Table of Signals Supported" on page
51.
* " IBM PC/AT" and "VGA" are registered trademarks
of IBM, Inc. of the United States.
14
480 line wide VGA*