Watching Computer Images With A Wide Screen - NEC PlasmaSync 4205W User Manual

Watching computer images with a
wide screen
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
1. Press the "WIDE / AUTO WIDE" button on the remote
controller.
2. Within 3 seconds ...
Press the "WIDE/AUTO WIDE" button again.
The screen size switches as follows:
NORMAL FULL
NORMAL size screen (4:3)
The picture has the same size as the normal computer im-
age.
FULL size screen
The image is expanded in the horizontal direction.
When using a graphic accelerator boad that is capable of
displaying 848 480.
FULL size screen
Information
Supported resolution
• When 800 dot 600 line signals are input, they are
converted to 640 dot 480 line or 853 dot 480 line
signals.
• When 1024 dot 768 line signals are input, they are
converted to 614 dot 460 line or 853 dot 460 line
signals.
• When 1280 dot 1024 line signals are input, they are
converted to 640 dot 478 line.
See page 44 for details on the display output of the
various vesa signal standards supported by the moni-
tor.
• When 852 dot 480 line wide VGA (*) signals with
a vertical frequency of 60 Hz and horizontal frequency
of 31.72 kHz are input, select "WIDE" for the "RGB
SELECT" setting. Since selecting an 848 480 sig-
nal automatically displays the image in correct size,
it is not necessary to change the RGB SELECT set-
ting.
* "IBM PC/AT" and "VGA" are registered trademarks of IBM, Inc.
of the United States.
16