Specifications - NEC MultiSync XG-1101 Operation Manual

1 2 3 4 5 6
1 2 3 4 5 6

SPECIFICATIONS.

1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
rojection type ................. Refraction type
Projector and screen are separated
Projection system .......... 3 lens and 3 CRTs in-line
Scanning frequency ....... (XG-1351/XG-1351G)
H 15 to 135 kHz/V 40 to 160Hz
(XG-1101/XG-1101G)
H 15 to 110 kHz/V 40 to 160Hz
(XG-751/XG-751G)
H 15 to 75 kHz/V 40 to 160Hz
Retrace time .................. H 6.0 S (fH 15 to 30kHz)
H 2.6 S (fH 30 to 77kHz)
H 2.0 S (fH 77 to 120kHz)
H 1.4 S (fH 120 to 135kHz)
V 270 S
Video bandwidth ............ 150MHz (-3dB) XG-1351/XG-1351G
120MHz (-3dB) XG-1101/XG-1101G
110MHz (-3dB) XG-751/XG-751G
CRT ............................... 8 inch liquid cooled
Deflection angle 90 degrees
Lens .............................. Hybrid lens with ECP and ARC , F1.1
HD-18: XG-1351/XG-1351G/XG-1101/XG-1101G
HD-144N: XG-751/XG-751G
(ECP: Enhanced Color Purity, except B-lens/ARC:
Anti-Reflective Coating)
Picture size .................... 60 to 300 inches diagonal
Resolution ..................... 1500TV lines at center (HDTV)
1350TV line at corner (HDTV)
Pixel resolution .............. 2500 2000 dots (Addressable)
(XG-751/XG-751G: 1600 1200 dots )
Light output ................... 240 ANSI lumens (XG-1351/XG-1351G/XG-1101/
XG-1101G), 230 ANSI lumens (XG-751/XG-751G)
High voltage .................. 32kV
Input .............................. RGB signal 0.7Vp-p 75 ohm positive (BNC)
H/V sync 0.7 to 4.0Vp-p 75 ohm/High Z negative
or positive (BNC)
COMP sync 0.7 to 4.0Vp-p 75 ohm/High Z
negative or positive (BNC)
Sync on G 0.3 to 0.6Vp-p 75 ohm negative (BNC)
COMP Video 1.0Vp-p 75 ohm positive (BNC)
S-video: Y 1.0Vp-p 75 ohm positive
Video system NTSC, PAL, SECAM and NTSC4.43
Convergence .................. Digital convergence (Pre-set 100 positions)
Quick copy convergence
Static and wave convergence
Point convergence, Zone convergence
Convergence limits ........ Less than 0.2% of V-height
Warm up time ................ 20 minutes
Setup signal ................... Cross hairs, Cross hatch, Dot, Window Pattern, H
test pattern
Power supply ................. AC 120V 60Hz (XG-1351/XG-1101/XG-751)
AC 220-240V 50Hz (XG-1351G/XG-1101G/XG-
751G)
1) This works only for VIDEO signals.
2) This works only for NTSC video signals.
3) This works only with the Switcher operation.
Specifications are subject to change without notice.
The dimensions given for the projector do not include
protruding parts.
C 0.28Vp-p 75 ohm (burst level)
Power consumption ...... 750W (XG-1351/XG-1101), 690W (XG-751)
730W(XG-1351G/XG-1101G), 660W (XG-751G)
Input current ................. 6.7A (AC 120V)XG-1351/XG-1101
6.2A (AC 120V)XG-751
3.4A (AC 220-240V)XG-1351G/XG-1101G
3.1A (AC 220-240V)XG-751G
Safety and regulation XG-1351/XG-1101/XG-751;
XG-1351G/XG-1101G/XG-751G;
Cabinet dimensions ....... 610(W)X812(D)X325(H) mm
24.02(W)X31.97(D)X12.80(H) inch
Weight ........................... 63.0 kg/139.0 lbs(XG-751/XG-751G)
67.4 kg/148.7 lbs (XG-1351/XG-1351G/XG-1101/
XG-1101G)
Remote control .............. Wired application
Wireless (operating distance 7m/23ft.)
Remote control functions ..... User remote (RC-6320); Power ON/OFF, Input
signal select, Picture mute, Bright, Contrast, Color
1)
Source information, Static convergence, Normal-
ize, Enter, End, Closed Caption
Full function remote (RC-6321); Test, Display, Help,
Information, Input list, Static focus, Edge focus, H/
V position, White balance select, Static conver-
gence, Wave convergence, Point convergence, H/V
amplitude, H/V linearity, H/V key-stone, H/V pin-
cushion, H/V blanking, Tilt, Skew, H/V bow, Store,
Normalize, Enter, End
Main control function .... Power ON/OFF, Input signal select,
External control ............. Power ON/OFF, Input signal select, Picture mute,
Sound mute
PC control ..................... Acceptable
Supplied accessories ..... Full function remote control unit (RC-6321), User
remote control unit (RC-6320), Remote cable
16m/52ft., AC line cable, Terminal cover,
Operation manual, Set-Up manual*, Installation
manual*
Environment .................. Temperature 0 to 40 degrees C
Humidity 0 to 90% non-condensing
Storage -10 to 50 degrees C
Sound emission ............. XG-1351/XG-1101/XG-751 less than 45dB
XG-1351G/XG-1101G/XG-751G less than 70dB
(A). Complies with ISO 3744 or ISO 7779
*Set-Up manual and Installation manual are not included
with XG-751G/XG-1101G/XG-1351G.
35
Meets FCC class A requirements
UL Approved (UL 1950, CSA 950)
DHHS Approved
Meets DOC (Canada)
Meets RED ACT
Meets EMC Directive (EN55022,EN61000-3-2,
EN61000-3-3, EN50082-1)
Meets Low Voltage Directive (EN60950, TÜV
GS Approved)
PTB Approved
1) 2) 3)
, Sharpness , Tint , Volume , Sound mute
3)
, Remote control data input
3)
,