Medela Supplemental Nursing System Step-By-Step Manual

Supplemental Nursing System
Step by step guide on how to clean,
assemble and use your SNS
How to clean your SNS
Before first use and after each use
Rinse all parts with Clean all parts with
cold water plenty of warm,
(approx. 20°C/68°F). soapy water (approx.
30 °C /86°F).
o
20 C
Before first use and once a day
Further clean the container,
TwistLok lid, valve and lid
®
with either boiling water, in the
dishwasher or with Medela
Quick Clean bags.
TM
Drying and Storage
After cleaning, dry all parts with
a clean cloth or leave to dry on a
clean cloth.
™
Rinse all parts again
with
cold water
(approx. 20°C/68°F).
30 o C
To clean with boiling water,
cover the container, TwistLok lid,
valve and lid with water and boil
for five minutes.
or
5 mins
Store the clean parts in a clean
place. Do not store parts in an
airtight container or bag.
(SNS )
™
Fill the cleaning aid Flush the tube
with warm, soapy again 3 times with
water and flush the clean water.
tube 3 times.
x3
To clean in the dishwasher, place
the container, TwistLok lid, valve
and lid on the top rack or in the
cutlery section.
Your SNS system
Container Lid TwistLok Lid
Ring Clip
Finally, flush the
tube with air until
the inside is
visibly dry.
x3
To clean the container,
TwistLok lid, valve and lid
in the microwave, use the
Medela Quick Clean TM bags in
accordance with the instructions
on the bag.
or
Tube Cleaning Aid
Valve Clamp