NEC MultiSync MD213MC Specifications page 2

NEC MD213MC
TEChNICAL SPECIFICATIONS
Panel technology
Screen diagonal [inch/cm]
Active screen area [cm]
Native resolution [Megapixel]
Landscape / Portrait mode [Pixel]
Pixel pitch [mm]
Contrast ratio (typ.)
Viewing angle (h / V @ CR > 10:1)
Luminance (maximum Native)
Luminance (calibrated)
Response time (typ.) [ms]
Color reproduction [Bit-Depth]
Programmable gamma correction
Factory calibration
Signal inputs
horizontal frequency [khz]
Vertical frequency [hz]
Power consumption (max.) [W]
Power saving mode [W]
Power requirements
Dimensions (W x h x D) [mm]
Weight (including stand) [kg]
Stand features
Safety and ergonomics
Ambient temperature (operating) [°C]
Ambient humidity (operating) [%]
VESA mounting interface [mm]
Kensington Lock (Theft security)
Other advanced features
Approved Display Controllers
Warranty
Shipping contents
Options
NEC MD SERIES COLOR DISPLAy SySTEMCONFIGURATIONS*
Display Model variety
Display controller board variety
Software
CE-MDD declaration for model MD213MC is in accordance with the European Directive
93/42/EEC (Medical Device Directive). NEC MD Series Display Systems are registered as
medical devices at DIMDI and succeeded pre-qualification for the German X-ray ordi-
nance acceptance tests according to DIN V6868-57.
For further informationen please contact us at: med-info@nec-displays.com
www.medical.nec-display-solutions.com
The data in this publication is for illustration purposes only and does not necessarily represent standards or specifications which must be met by NEC Display Solutions. All hardware and software names are
brand names and/or registered trademarks of the respective owners. All rights reserved, in particular for the case of granting of patent or petty patent. Availability and technical specifications are subject to
change without notice. Issue: 03/09
All hardware and software names are brand names and/or registered trademarks of the respective manufacturers. All rights reserved. All specifications are subject to change without notice. 03/09
www.nec-display-solutions.com
NEC Display Solutions Europe Gmbh
UA-SFT TFT
21.3 / 54.0
43.2 x 32.4
3
2048 x 1560 / 1560 x 2048 at 60 Hz
0.2115 x 0.2115
750:1
176°/ 176°
800 cd/m 2
400 cd/m , recommended
2
24 (t r + t f )
8-bit (256 grey tones per R G B input) with 16,777, 216 total colors
12-bit (4096 grey tones)
Gamma correction according to DICOM GSDF at 400 cd/m
Digital: 1 x DVI-D; 1 x DVI-I; Analog: 1 x Mini D-Sub 15 pin
31.5 - 94.8
50.0 - 85.0
130
<2.0
100 - 240V AC 2.0 A/0.5 A; integrated power supply
358.6 x 477.9 - 627.9 x 247.3 (portrait); 464.8 x 424.8 - 574.8 x 247.3 (landscape)
10.9
150 mm height adjust range, Tilt, Swivel, Screen rotation
Pending: CE-MDD (EN60601-1, EN60601-1-2); TÜV Approved Medical Device (TÜV GM);
DIN V6868-57 Category A; FDA510(k), CCC
+5 to +30
30 to 80 (non-condensing)
100 x 100 (4 points)
yes
X-Light 3 Backlight System for stable white luminance and white point; Individual factory
®
calibrated DICOM gamma correction curve; Precise DICOM GSDF calibration using internal 12-bit
look-up table; Control buttons on cabinet back side, with virtual keypad on screen; Multiple OSD
lock-out modes to prevent tampering with calibrated screen
Choice of ATI,Matrox and nVIDIA models for best imaging performance and compatibility with
GammaCompMD software
3 years warranty incl. backlight
Display; Continental and UK power cord; Signal Cable DVI-D to DVI-D; Multiple language quick
reference guide; DVD-ROM with User Guides, GammaCompMD Client QA Software and approved
display controller drivers
Calibration instrument (MDSVSENSOR), Protective screen (click-on option)
3 Megapixel
Single or Dual Display
AMD/ATI, Matrox and nVIDIA
PCI Express Bus
GammaCompMD Client
Software
2
1
2
3
4
A typical NEC MD
Series Display
System configuration
1 Single or Dual head displays
2 Display Controller
Board
3 GammaCompMD
Quality Assurance Software
4 Calibrator (optional)