Garland P10GMSBPE User Manual
  1. Manuals
  2. Brands
  3. Garland Manuals
  4. Network Hardware
  5. P10GMSBPE
  6. User manual

Garland P10GMSBPE User Manual

Hide thumbs Also See for P10GMSBPE:
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide
P10GMSBPE / P10GSSBPE
12/2022
Release Version: 4.22.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P10GMSBPE and is the answer not in the manual?

Questions and answers

Related Manuals for Garland P10GMSBPE

Summary of Contents for Garland P10GMSBPE

  • Page 1 User Guide P10GMSBPE / P10GSSBPE 12/2022 Release Version: 4.22.1...
  • Page 2 The Garland Technology trademarks, service marks ("Marks") and other Garland Technology trademarks are the property of Garland Technology, LLC. PacketMAX Series products of marks are trademarks or registered trademarks of Garland Technology, LLC. You are not permitted to use these Marks without the prior written consent of Garland Technology.

  • Page 3: Table Of Contents

    TACACS Ping Test Network Settings IPv4 / Disable IPv4 Enable IPv6 Enable IPv6 Disable Add SSL Certificate Disable Using Uploaded SSL Certificate Date & Time Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 4 Method 1 Method 2 Enable/Disable Config Map Disable Config Map Enable Config Map 8. Aggregate Mode 9. Filter Tap Mode Packet Broker Filter Templates Config Maps Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 5 Method 1 Method 2 Enable/Disable Config Map Disable Config Map Enable Config Map 11. Port Info Port Configuration Port Description Set Speed Mode Port Statistics Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 6: Dashboard

    Inline Appliance Link/Activity LED Port 4 H/M * The L/A1, L/A2, Port 3 L/A and Port 4 L/A LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 7: Span Mode

    Span Port Link/Activity LED Port 4 H/M * The L/A1, L/A2, Port 3 L/A and Port 4 L/A LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 8: Span (Packet Inject) Mode

    Span and Packet Inject Port Link/Activity LED Port 4 H/M * The L/A1, L/A2, Port 3 L/A and Port 4 L/A LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 9: Breakout Mode

    Breakout Port Link/Activity LED Port 4 H/M * The L/A1, L/A2, Port 3 L/A and Port 4 L/A LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 10: Filter Mode

    Filter Port Link/Activity LED Port 4 H/M * The L/A1, L/A2, Port 3 L/A and Port 4 L/A LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 11: Aggregate Mode

    Aggregate Port Link/Activity LED Port 4 H/M * The L/A1, L/A2, Port 3 L/A and Port 4 L/A LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 12: Filter Tap Mode

    Filter Tap Mode LED Indications Port 1 L/A1 Network Port Link/Activity LED Port 2 L/A2 Network Port Link/Activity LED Port 3 L/A Breakout/Aggregate Port Link/Activity LED Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 13: Bypass Filter Mode

    Port 1 L/A1 Network Port Link/Activity LED Port 2 L/A2 Network Port Link/Activity LED Bypass LED Port 3 L/A Inline Appliance Link/Activity LED Port 3 H/M Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 14: System

    The following configuration options may be displayed, modified, enabled or disabled under the System panel. System Info SNMP General Export Configuration Admin Import Configuration Network Settings Software Upgrade Date & Time Reboot Syslog Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 15: System Info

    The General System Settings panel will be displayed. 2. Select Edit Configuration. 3. Enter the desired Chassis Name. 4. Enter the desired Key Press Timeout. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 16: Admin

    OPER and NOC. All three groups may be modified, however only the OPER and NOC groups may be deleted. 1. Select Groups + to create a new group. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 17: Local Authentication Disable

    The TACACS Primary panel will be displayed. 2. Enter the IP Address, IPv4 or IPv6. 3. Enter the Secret Word, (optional). 4. Select Save to save updates. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 18: Tacacs Test

    The TACACS Test option will be active only if TACACS authentication has previously been enabled. 1. Select TACACS Test. The TACACS Test panel will appear. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 19: Tacacs Ping Test

    IPv6 Address IPv6 Gateway SSL Certificate Loaded Using Uploaded SSL Certificate 1. Select Network Settings. The Network Settings panel will be displayed with the current configuration. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 20: Ipv4 / Disable

    The Select Certificate and Select Key File panel will appear. 2. Select Choose File for Select Certificate. 3. Select the desired cert.pem file. 4. Select Open. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 21: Disable Using Uploaded Ssl Certificate

    1. Select Date & Time. The Date & Time Settings panel will be displayed. Timezone 1. Select Edit Settings. 2. Select the desired Timezone using the pull down panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 22: Ntp Authentication (Symmetric)

    The system supports an IPv4 or IPv6 address for NTP timing. If IPv4 is desired, then an IPv4 management interface must be assigned. If IPv6 is desired, then an IPv6 management interface Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 23: Syslog

    8. Select Save. 9. Select Cancel to return the Syslog Configuration panel. Syslog Test 1. Select Syslog Test. The GUI message will be displayed,”Syslog Test Successful!”. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 24: Snmp

    14. Select Cancel to return the SNMP Configuration panel. SNMP Test 1. Select SNMP Test. The GUI message will be displayed,”Test Successful!”. 2. Verify the SNMP Test Message on the MIB Browser. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 25: Export Configuration

    This option allows the unit to be rebooted. The traffic will be affected for up to 1 minute. 1. Select Reboot. The Reboot Device panel will be displayed. 2. Select Reboot. The unit will present an “Are you sure?” message. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 26: Bypass Mode

    Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 27: Bypass Tap Name

    The following configuration options may be displayed, modified, enabled or disabled under the Bypass Taps panel. Bypass Taps Panel Tap Settings Bypass Tap Name Heartbeat Settings Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 28 User Guide EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1 1. Select Bypass Taps on the Dashboard Menu bar. The Bypass Taps panel will be displayed. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 29: Taps Settings

    Reverse Bypass 1. Edit the Tap Settings, by placing the cursor on the tap and double-press the left mouse button. The Tap panel will be displayed. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 30 If selected, the tap will switch the traffic between the network ports with no regard for the inline appliance port(s), link or heartbeats. Typically used during maintenance activities. Figure 4 Bypass Mode (Force Bypass) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 31 If enabled and the inline appliance port(s) fail, loss of link or heartbeats. The TX will be disabled on both of the network ports. The RX for both network ports remain on. Figure 7 Bypass Mode (Reverse Bypass) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 32: Span Mode

    In this mode, the network port 1 and span ports 2, 3 and 4 are defined by the system. Port 1 is an ingress only port. Ports 2, 3 and 4 are egress only ports. Figure 8 Span Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 33: Span Packet Inject Mode

    Port 1 is an ingress and egress port. The traffic ingressed in port 1 is egressed out ports 2, 3 and 4. The traffic ingressed in ports 2, 3 and 4 are egressed out port 1. Figure 9 Span Packet Inject Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 34: Breakout Mode

    If link is lost on one of the network ports. The TX will be disabled on the other network port. The RX for both network ports remain on. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 35: Filter Mode

    In this mode, the unit functions as a 4 port packet broker. The traffic that is passed between the ports is determined by the config map(s) and filter(s) created. Config maps may be created between all four ports as desired. Figure 12 Filter Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 36: Packet Broker

    The following configuration options may be displayed, modified, enabled or disabled under the Packet Broker panel. Filter Templates Config Maps Statistics 1. Select Packet Broker on the Dashboard Menu bar. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 37 IPv6 is not supported for this model Inner VLAN ID Outer VLAN ID DSCP IP Protocol L4 Source Port or Range L4 Destination Port or Range Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 38: Config Map

    4. Place the cursor in the Name panel and enter the name. 5. Select the Check to apply. 6. Select the Description pencil to apply a description, optional. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 39: Ingress

    The filters are considered from top to bottom. A filter may be selected and moved up or down depending on priority preference. Figure 14 Filter Figure 15 Filter System Considerations Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 40: Egress

    The “Save this configuration? (May take a few seconds.)” panel will be displayed. 2. Select OK to save the Config Map. 3. Select Cancel to disregard. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 41: Modify A Config Map

    1. Select Refresh to refresh the config map statistics. 2. Select Clear Counters to clear and refresh the config map statistics. 3. Select the View Counts icon to display individual statistics. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 42: Delete Config Map

    1, the Traffic_B config map is the next priority 2 and finally the Traffic_C is the next priority 3. The priority of a config map may be changed to a higher or lower value using two methods. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 43: Method 1

    The Set Priority panel will be displayed. 2. Enter the priority in the Set New Priority panel. 3. Select Set to accept the priority value. 4. Select Cancel to disregard. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 44: Enable/Disable Config Map

    The traffic ingressed port 1 is egressed out ports 3 and 4. The traffic ingressed in port 2 is egressed out ports 3 and 4. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 45: Filter Tap Mode

    1 to filter tap port(s) 3 and/or 4 as well as, network port 2 to filter tap port(s) 3 and/or 4. LFP is supported on the network ports in this mode. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 46: Packet Broker

    The RX for both network ports remain on. Packet Broker The following configuration options may be displayed, modified, enabled or disabled under the Packet Broker panel. Filter Templates Config Maps Statistics Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 47 Create Config Map panel and may be used to create an ingress or egress filter. Template options may be modified when applied to a config map. Any option modification made will Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 48 10. The filter template may be deleted by selecting the Red X. Config Maps Config maps are unidirectional connections between ingress port(s) to egress port(s) and/or a load balancing group. 1. Select Configuration Maps. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 49: Ingress

    Drag the port to the Ingress panel and release. Ports may be added in any combination. If ports 1 and 2 are added, then the traffic from the ports will be aggregated. Figure 22 Ingress Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 50: Filter

    4. Select Accept once all desired options have been modified. 5. Remove a Filter Template by selecting the Red X. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 51: Egress

    3. Select Cancel to disregard. Modify a Config Map 1. Modify a config map by selecting the Edit icon. Modifications may be made using the create sections previously discussed. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 52: Config Map Statistics

    6. Select Close to return to the Packet Broker Configurations panel. Delete Config Map 1. Select the Delete in the Delete column for the desired config map(s). Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 53: Config Map Priority

    2. Select Save to save updates. Method 2 1. Select Set. The Set Priority panel will be displayed. 2. Enter the priority in the Set New Priority panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 54: Enable/Disable Config Map

    1. Select the red dash for the config map in the Enable column. The red dash will change to a green check. 2. Select Save. The red dash will change to a green check. 3. Select Save. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 55: 10. Bypass Filter Mode

    Config maps may be created from network port 1 to inline appliance port 3 as well as, network port 2 to inline appliance port 4. Figure 27 Bypass Filter Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 56: Bypass Taps

    Bypass Taps Panel Tap Settings Bypass Tap Name Heartbeat Settings 1. Select Bypass Taps on the Dashboard Menu bar. The Bypass Taps panel will be displayed. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 57: Taps Settings

    1. Edit the Tap Settings, by placing the cursor on the tap and double-press the left mouse button. The Tap panel will be displayed. 2. Select Edit Tap Settings. The Configure Inline Appliance panel will be displayed. 3. Select the Tap Mode. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 58 If selected, the tap will switch the traffic between the network ports with no regard for the inline appliance port(s), link or heartbeats. Typically used during maintenance activities. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 59 7. Select Accept to save updates. Save must additionally be selected on the Bypass Taps panel. 8. Select Cancel to return the Bypass Taps panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 60: Filter Templates

    The following configuration options may be displayed, modified, enabled or disabled under the Filters panel. Filter Templates Config Maps Statistics 1. Select Filters on the Dashboard Menu bar. The Filter Configurations panel will be displayed. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 61 7. Select Save Template once all desired option modifications have been completed. 8. The new filter template will appear on the Filter Templates panel. 9. The filter template may be modified by selecting the template name. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 62: Config Map

    6. Select the Description pencil to apply a description, optional. 7. Place the cursor in the Description panel and enter the description, optional. 8. Select the Check to apply updates. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 63: Ingress

    The filters are considered from top to bottom. A filter may be selected and moved up or down depending on priority preference. Figure 34 Filter Figure 35 Filter System Considerations Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 64: Egress

    The “Save this configuration? (May take a few seconds.)” panel will be displayed. 2. Select OK to save the Config Map. 3. Select Cancel to disregard. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 65: Modify A Config Map

    4. Select Refresh Counts to refresh the statistics. 5. Select Clear Counts to clear and refresh the statistics. 6. Select Close to return to the Packet Broker Configurations panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 66: Delete Config Map

    2 and finally the Traffic_C is the next priority 3. The Priority of a config map may be changed to a higher or lower value using two methods. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 67: Method 1

    Disable Config Map 1. Select the green check for the config map in the Enable column. The green check will change to a red dash. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 68: Enable Config Map

    The following configuration options may be displayed or modified under the Port Info panel. Port Number Speed Port Description Mode Link SFP Data Set Speed 1. Select Port Info on the Dashboard menu bar. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 69 1. Modify the port mode by selecting the pull down panel for the desired port. 2. Select the desired mode. The available port modes are Normal, Loopback, Listen Only and Force Link. 3. Select Save to save updates. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

  • Page 70: Port Statistics

    1. Select Port Statistics on the Port Configuration panel. The Port Statistics panel will be displayed. 2. Update the statistics by selecting Refresh. 3. Clear and refresh the statistics by selecting Clear. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

This manual is also suitable for:

P10gssbpe

Table of Contents