NEC MultiSync LCD1990SXp User Manual page 23

Advanced OSM Controls
Tag 7 VIDEO DETECT
continued
OFF TIMER
IPM
(Intelligent Power
Manager)
IPM SETTING
OVER DRIVE
SIDE BORDER
COLOR
LED BRIGHTNESS
LED COLOR
COLORCOMP
Selects the method of video detection when more than one
video input is connected.
FIRST: If "FIRST" is selected as the VIDEO DETECT option, the
monitor displays the signal from the fi rst input port. If there is no
signal present at the fi rst input port, then the monitor will search
for a signal from the next input port.
If a new input signal is connected to another of the monitor's
input ports while the monitor is in FIRST mode, the monitor will
not switch automatically to the new source.
LAST: If "LAST" is selected as the VIDEO DETECT option,
then each time a new input source is detected, the monitor
automatically displays the new signal.
NONE: The monitor will only search other input ports while the
power is on.
Monitor will automatically power after a user-determined length
of time passes. Before powering off, a message will appear on
the screen asking the user if they want to delay the turn off time
by 60 minutes. Press any OSM button to delay the turn off time.
The Intelligent Power Manager allows the monitor to enter into
a power saving mode after a period of inactivity. The IPM has
three settings.
OFF: Monitor does not go into power save mode when the
input signal is lost.
STANDARD: Monitor enters power save mode automatically
when the input signal is lost.
OPTION: Monitor enters power save mode automatically when
the amount of surrounding light goes below the level that is
determined by the user.
Adjusts the luminance value for IPM.
Turns the OVER DRIVE function ON or OFF. Over Drive may
reduce blurring that occurs in some moving images. When
Over Drive is on, response time is improved.
When the IMAGE ROTATION function is used, the OVER DRIVE
function will be turned off automatically.
Adjusts the side black bars color between black and white.
For wide aspect monitors.
Controls the brightness of the LED on the front of the
monitor.
The LED on the front can be blue or green.
This function electronically compensates for the slight variations
in the white uniformity level as well as for slight differences in
color that may occur throughout the display area of the screen.
These variations are characteristic of LCD panel technology.
This function improves the color and evens out the luminance
uniformity
of the display.
21
- continued