Removing And Installing The Engine - Toro MMXD-958H-S Operator's Manual

3. Remove the 3 screws (4 mm) from the exhaust
deflector and remove the deflector
4. Remove the screws (5 mm and 6 mm) from the muffler
protector, and remove the muffler protector
47).
5. Remove the screw (4 mm) from the spark arrester and
remove the spark arrester from the muffler
6. Use a brush to carefully remove carbon deposits from
the spark-arrester screen
Note: Replace the spark arrester if it has breaks or
holes.
G019332
1. Screen
7. Install the spark arrester, muffler protector, exhaust
deflector, and muffler in the reverse order of
disassembly.
8. Install the divider plate; refer to
Plate (page 24).
Removing and Installing the
Engine
Removing the Engine
WARNING
The spring is under tension when installed and can
therefore cause personal injury.
Be careful when removing the spring.
1. Park the machine on a level surface and stop the engine;
refer to Stopping the Engine (page
2. Ensure that the engine and the exhaust system surfaces
are cool.
3. Remove the belt guide; refer to
(page 33).
4. Remove the belts; refer to
33).
5. Using a spring-removal tool, (Toro part 92-5771),
remove the spring from the anchor bracket on the
engine deck (Figure
(Figure 47).
(Figure
(Figure 48).
1
2
Figure 48
2. Brush
Installing the Divider
20).
Removing the Belts
Removing the Belts (page
49).
Note: Leave the other end of the spring attached to
the frame of the machine.
(Figure
47).
1. Anchor bracket
2. Engine deck
3. Spring-removal tool (Toro
part 92-5771)
6. Remove the bolt and nut that secures the rear bracket
for the engine deck hinge to the frame of the machine
(Figure
1
2
1. Engine deck
2. Pivot
3. Rear hinge bracket
7. Lift up on the rear edge of the engine deck and remove
the hinge bracket
8. Slide the engine deck rearward and out from the
forward hinge bracket
Note: Do not remove the forward hinge bracket.
30
2
3
4
Figure 49
4. Spring-removal tool
(spring removed)
5. Spring (spring removed)
50).
3
Figure 50
4. Frame
5. Nut
6. Bolt
(Figure 50).
(Figure 51).
1
5
G0201 19
6
5
4
G020120