Daikin FVXM25A3V1B User Reference Manual page 40

6 | Operation
To connect using the WPS button
To connect using SSID and KEY number
User reference guide
40
▪ The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press to change the SP menu to .
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between orange and partly
green.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: If the connection was successful, the Daikin eye colour alternates between
blue and partly green.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY number" [
5 Press to exit the menu.
Result: The display will return to the home screen.
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press twice to change the SP menu to .
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between red and partly
green.
4 Open the ONECTA application on your smart device and follow the steps on
the screen.
Result: If the connection was successful, the Daikin eye colour alternates between
blue and partly green.
5 Connect your smart device to the same home network as the unit.
6 Press to exit the menu.
Result: The display will return to the home screen.
for at least 5 seconds while the unit is not
1×
4 40].
for at least 5 seconds while the unit is not
2×
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
"To connect using
Split system air conditioners
4P625990-1D – 2022.09