NEC MultiSync LCD1525X User Manual page 20

Troubleshooting cont.
Display image is not sized properly
• Use the OSM Image Adjust controls to increase or decrease the H. Size.
• Check to make sure that a supported mode has been selected on the display
card or system being used. (Please consult display card or system manual to
change graphics mode.)
USB Hub does not operate
• Check to make sure the USB cord is properly connected. Refer to your USB
devise User's Manual.
• Check the OSM INPUT SELECT and the USB input connector on the back of the
monitor.
No Video
• If no video is present on the screen, turn the Power button off and on again.
1525X.wpc
18
20 11/5/99, 12:56 PM