Table of Contents
Advertisement
Specifications
IMPORTANT SAFETY INFORMATION
1. Secure workpiece with clamps.
2. Properly assemble planer before use.
3. Sharp blade; avoid contact during set up and use.
4. Wear ANSI-approved safety goggles and heavy
duty work gloves during set up and use.
5. Keep work area clean.
6. Observe work area conditions. Do not use
tools in damp or wet locations. Do not expose
to rain. Keep work area well lighted.
7. Dress properly. Do not wear loose clothing or jewelry.
Protective, electrically nonconductive clothes and
non-skid footwear are recommended when working.
Wear restrictive hair covering to contain long hair.
8. Stay alert. Watch what you are doing, use common
sense. Do not operate any tool when you are tired.
Page 2
#4 Jack Plane
Mini Block Plane
For technical questions, please call 1-888-866-5797.
2" Wide Blade @ 25°
1.3" Wide Blade @ 25°
9. Take caution as some woods contain preservatives
such as copper chromium arsenate (CCA)
which can be toxic. When working with this
type of wood, extra care should be taken to
avoid inhalation and minimize skin contact.
10. Do not overreach. Keep proper footing
and balance at all times.
11. This product is not a toy. Do not allow
children to play with or near this item.
12. Use as intended only.
13. Inspect before use; do not use if
parts are loose or damaged.
14. Store idle equipment. When not in use, tools must
be stored in a dry location to inhibit rust. Always
lock up tools and keep out of reach of children.
15. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Item 92553
Advertisement
Table of Contents
