Central Forge 90310 Assembly And Operating Instructions

Duplex rabbet & fillister plane

Download this manual

DUPLEX RABBET &

FILLISTER PLANE

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Table of Contents

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2: Specifications
Do not overreach. Keep proper footing and balance at all times. SKU 90310 Specifications 9-3/4” L x 4-1/8” W x 4-7/8” H 9-3/4” L x 1-1/2” W x 4-3/8” H 1 @ 5-3/8”...
Page 3 When unpacking, check to make sure the parts shown on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 4: Operation
Fence Adjustment knob. To adjust this Fence (determines width of cutting area), loosen the Fence Adjuster knob and move the Fence either closer or further from the body of the Planer. With the Fence in the desired position, secure it in place by tightening the Fence Adjuster knob.
Page 5: Assembly Drawing
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 90310 Assembly Drawing Blade #1 Blade Removal...