Vise. STAY AlERT. Watch what you are doing at all times. Use common sense. Do not operate this product when you are tired or distracted from the job at hand. SKU 95203 For technical questions please call 1-800-444-3353. Page 2...
Back Jaw (1) and the drilled holes in the workbench. The length of hardened steel mounting bolts will vary, depending on the thickness of workbench the Vise is to be attached to. SKU 95203 For technical questions please call 1-800-444-3353. Page 3...
Page 4
To remove the object you are working on, turn the Handle (7) counterclockwise two to three times, opening the Jaws (1 & 2). Remove your work piece. Back Jaw Front Jaw (2) with Clamp (1) T-Handle (4) Handle (7) Figure 3 SKU 95203 For technical questions please call 1-800-444-3353. Page 4...
Keep the Jaw (1 & 2) clean so your work piece will not be soiled. Check and tighten the mounting screws to be sure the vise has not loosened from it’s mounting. SKU 95203 For technical questions please call 1-800-444-3353. Page 5...
PARTS IllUSTRATION PART 1 Back Jaw with Clamp PART 2 Front Jaw PART 3 main Screw PART 5 PART 4 Bushing T-Handle PART 6 main Slide Rod PART 7 Handle SKU 95203 For technical questions please call 1-800-444-3353. Page 6...
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 95203 For technical questions please call 1-800-444-3353. Page 7...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 95203 For technical questions please call 1-800-444-3353.