Download Print this page

Central Forge 90560 Assembly And Operating Instructions

Mini bench top vise set (2 piece)

Download this manual

MINI BENCH TOP VISE

SET (2 PIECE)

9 0 5 6 0

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Page 1 MINI BENCH TOP VISE SET (2 PIECE) 9 0 5 6 0 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2003 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Page 2: Specifications
Use eye protection. Always wear ANSI approved impact safety goggles. Do not overreach. Keep proper footing and balance at all times. Do not hang on the vise or attempt to support weight of anything other than the small parts being secured. SKU 90560 Page 2...
Page 3 When unpacking, check to make sure the parts shown in the photos on page 4 are in- cluded. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. SKU 90560 Page 3...
Page 4 1. Keep the Jaws and Handles clean and free of dirt, debris, or grease. 2. Before each use, make sure the Vise is securely mounted to the work surface. Note: Replacement parts are not available for this product. SKU 90560 Page 4...