Table of Contents
Advertisement
In the Box
Camera mount
adapter
Screw cap
Crossbar
Safety Information
• Disassembling the light head may cause damage to internal components.
The floodlight may not function properly after disassembly.
• Turn OFF the main circuit before installation.
• DO NOT remove the protective LED lens.
• DO NOT look directly at LEDs that are turned on.
• DO NOT leave bare wires exposed outside the wall canopy enclosure.
Installation
Pre-installation
Note:
If you are unfamiliar with electrical installations, we highly recommend
hiring a professional electrician to perform the installation.
1. Make sure you have all the included
materials.
2. You will be working with electrical wires
during the installation process. For safety
reasons, shut off the power to your floodlight
at the circuit breaker.
EVA gasket
Screws
Smart
floodlight
Wire nuts
USB cable
Page 2
Advertisement
Table of Contents
