Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Wasserstein Manuals
  4. Flood Light
  5. Floodlight For Google Nest Cam
  6. User manual

Wasserstein Floodlight For Google Nest Cam User Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Floodlight For Google Nest
Cam (battery)
USER MANUAL

Advertisement

loading

Related Manuals for Wasserstein Floodlight For Google Nest Cam

Summary of Contents for Wasserstein Floodlight For Google Nest Cam

  • Page 1 Floodlight For Google Nest Cam (battery) USER MANUAL...

  • Page 2: Product Highlights

    • 3-in-1 Floodlight, Charger and Mount. hiring a professional electrician to perform the installation. • The Wasserstein Floodlight gets triggered in the presence of motion at night. 1. Make sure that you have all the included materials. • Its PIR Motion Detection range is between 13 to 33 ft.
  • Page 3 2. Remove the protective tape from the EVA gasket. Press the adhesive side 2. Remove the crossbar attached to your junction box. firmly against the rear of the floodlight. Installing the Floodlight to the Junction Box 3. Ensure that the center screw hole and wire slot of the foam gasket are aligned with the screw hole and wire slot.
  • Page 4 4. Make sure that the wire connections are secured. Carefully place the Wiring the Floodlight and Junction Box through wires into the junction box. the EVA Gasket Important: Before mounting the floodlight, completely apply the EVA gasket around the perimeter of the cover plate where the back of the cover plate meets The white wire on your floodlight is a neutral wire.

  • Page 5: Mounting Your Camera

    3. Attach the magnetic plate onto the wall plate and turn it clockwise to lock it Mounting Your Camera in place 1. To charge your camera via the floodlight, please install the camera wall plate onto the floodlight. 2. Install the Nest Cam wall plate on the floodlight using the two short screws included.
  • Page 6 Mounting Your Camera along with the Anti-Theft 4. Attach the camera to the mount, and connect the charging connector to the camera to charge it. Mount 1. Place the security chain underneath the wall plate of the camera behind the screw hole. Back View Front View Note:...
  • Page 7 3. "Attach the magnetic plate onto the wall plate, and turn it clockwise to 4. Slide in the anti-theft mount on the camera, make sure to align the lock it in place." speaker/cable opening at the bottom. 5. Make sure that the end of the security chain with the small hole goes in between the screw holes of the mount.

  • Page 8: Safety Information

    7. Attach the camera to the floodlight with the magnetic mount and connect the magnetic connector to it. The floodlight keeps flashing. What should I do? • Check your connection of all three wires to the house power. • Check the area around the floodlight as it may be detecting motion. The floodlight will not turn on.
  • Page 9 This product has been certified by Wasserstein to meet Google’s compatibility standards. Google is not responsible for the operation of this product or its compliance with any applicable safety or other requirements. Learn more at g.co/madeforgoogle. Google’s “made for” badge, Google Nest Cam, and related marks are trademarks of Google LLC.