Advertisement
Advertisement
Table of Contents
Related Manuals for Wasserstein 3-in-1 Wired Floodlight, Charger and Mount for Blink Outdoor / XT2
Summary of Contents for Wasserstein 3-in-1 Wired Floodlight, Charger and Mount for Blink Outdoor / XT2
- Page 1 3-in-1 Wired Floodlight, Charger and Mount for Blink Outdoor / XT2 USER MANUAL...
- Page 2 In the Box wall plate long screw adapter with cable floodlight 4 x wall anchors camera mount adapter EVA gasket 8 x cable clips 4 x screws USB cable US, UK, EU plugs Safety Information • Disassembling the light head is not recommended as it may cause damage to internal components.
- Page 3 2. Remove the protective tape from the EVA gasket and press the adhesive side firmly against the rear of the floodlight. Important: Before mounting the floodlight completely, apply the EVA gasket. It prevents water from seeping into the wall plate. 3.
- Page 4 b. Connect the floodlight cable and adaptor cable together, then screw in the plastic cover. c. Plug the adapter onto the wall socket to power the floodlight. 6. Peel the adhesive skins then stick the cable clips onto the wall. Run the wires of the adapter through the cable clips for a better cable management.
- Page 5 Mounting Your Camera 1. To charge your camera via the floodlight, plug in the USB cable in the micro-USB port of the camera. Press in firmly. 2. Insert the Blink camera mount adapter. 3. Screw the camera onto the mount. 4.
- Page 6 Blink Outdoor is a trademark of Immedia Semiconductor Inc. www.wasserstein-home.com or contact us at: Blink XT2 is a trademark of Immedia Semiconductor Inc. contact@wasserstein-home.com Wasserstein is not affiliated with Immedia Semiconductor Inc. Made in China Wasserstein is a trademark of Dropcases Ltd.
Need help?
Do you have a question about the 3-in-1 Wired Floodlight, Charger and Mount for Blink Outdoor / XT2 and is the answer not in the manual?
Questions and answers