Related Manuals for Wasserstein 3-in-1 Smart Floodlight, Charger & Mount for Blink Outdoor & Blink XT 2
Summary of Contents for Wasserstein 3-in-1 Smart Floodlight, Charger & Mount for Blink Outdoor & Blink XT 2
- Page 1 3-in-1 Smart Floodlight, Charger & Mount for Blink Outdoor & Blink XT 2 USER MANUAL Sensor...
-
Page 2: Safety Information
In the Box Smart Camera mount EVA gasket floodlight adapter Screw cap Crossbar Screws Wire nuts USB cable Safety Information • Disassembling the light head may cause damage to internal components. The floodlight may not function properly after disassembly. • Turn OFF the main circuit before installation. •... - Page 3 If You Have an Existing Floodlight 1. Remove your existing floodlight from the junction box and disconnect the wires. 2. Remove the crossbar attached to your junction box. 3. Secure the ground wire. Page 3...
- Page 4 Installing the Floodlight to the Junction Box 1. Attach the crossbar included in the package to the junction box with the screws. a. Remove the protective tape from the EVA gasket. Press the adhesive side firmly against the rear of the floodlight. b.
- Page 5 Wiring the Floodlight and Junction Box Through the EVA Gasket The white wire on your floodlight is a neutral wire. The black wire on your floodlight is a hot wire. 1. Connect the green and yellow wire from the floodlight to the existing ground wire inside the junction box.
-
Page 6: App Setup
• 2.4Ghz WiFi Network (not compatible with 5GHz connections). • Upload speed of at least 2 Mbps. 1. Download the App Download the app by scanning the QR code or by searching "Wasserstein App" in Google Play Store or the App Store. App Store Google Play Store 2. - Page 7 Manual Scan 1. Select “Lighting” - “PIR Light （BLE+Wi-Fi)” 2. Power on the device, follow the steps displayed as shown on your app (Picture 2) Your floodlight will dim and flash in intervals. (Figure 1) Flash Flash Figure 1 selection Page 7...
- Page 8 3. Enter your Wi-Fi details, and click "Next". 4. Wait until your device has been successfully scanned. WiFi Login WiFi Password Wasserstein Smart Floodlight Page 8...
- Page 9 Auto Scan: 1. Enable pairing mode for your floodlight. 2. Wait until your floodlight has been automatically detected. Page 9...
- Page 10 4. App Functions Sensor Note: Display and interface are subject to change. Manual Sensor On/Off On/Off Light Intensity Motion Detection Range Floodlight Color Floodlight Light Sensitivity Turn-off Timer Duration of Light Flash Schedule Event Records Page 10...
- Page 11 5. How to Use Linked Devices You can control other devices through ‘Linked Devices’. On the "Sensor" page click on "Linked Devices"， Then click "+" on the lower right corner to enter the "Create new Smart" page. Here you can add multiple trigger conditions and tasks to perform.
- Page 12 6. Third-party Control (Google Assistant & Amazon Alexa) Follow the instructions inside to link your home assistant. Example of voice commands is also available in the App. Page 12...
-
Page 13: Important Tips
Mounting Your Camera (Blink Outdoor & Blink XT2) 1. To charge your camera via the floodlight, plug in the USB cable at the micro-USB port of the camera. Press in firmly. 2. Insert the Blink camera mount adapter. 3. Screw the camera onto the mount. 4. -
Page 14: Product Specifications
Blink Outdoor is not included. Blink XT2 is not included. For more information, visit: Wasserstein is not affiliated with Immedia Semiconductor Inc. www.wasserstein-home.com Wasserstein is a trademark of Dropcases Ltd. Blink Outdoor is or contact us at: a trademark of Immedia Semiconductor Inc. Blink XT2 is a contact@wasserstein-home.com trademark of Immedia Semiconductor Inc.
Need help?
Do you have a question about the 3-in-1 Smart Floodlight, Charger & Mount for Blink Outdoor & Blink XT 2 and is the answer not in the manual?
Questions and answers