Advertisement
Precautions for Handling of Internal Devices
Do not disassemble, repair, or modify the product
yourself
Do not disassemble, repair, or modify this product. Doing so may
cause an electrical shock or a fire. Do not put the product close to
fire, or immerse it in water. Doing so may cause an explosion. If the
product does not function normally, contact your service
representative.
Unplug all power cords
Turn the power off and unplug the power before removing the
computer's cover. Failure to do so could endanger you and may
damage the adapter or computer
Precaution on disposing or transferring
- Follow the ordinances by your local government when you are
disposing the product. Contact the local government for more
information.
- If you are transferring this product to other people, be sure to
transfer all items that come with the product including this guide
along with the product.
Ground yourself to dissipate any static charge
before handling the adapter.
To prevent any damage on components due to static electricity,
make sure to discharge static electricity from yourself before you
touch the adapter.
Don't touch uncoated metal parts on adapter.
Never touch the adapter's LAN port, terminals of components or
uncoated metal parts on adapter. Otherwise, taint, erosion or
others may cause loose connection. Do not touch this product
with wet or dirty hands.
Excessive force could break the connector.
On installing this adapter, do not insert it by force. Otherwise, the
adapter and the server may be damaged.
Don't touch the tip of bracket to other parts of
server
When you insert the 4 adapter into expansion slot, be careful not to
touch the tip of bracket to other parts of server (such as other
components or board). Otherwise, they may be damaged.
Firmly connect the network cable
When connecting the cable, insert the cable connector until you
hear a click sound.
Limitations
Supported OS
For OS that support will depend on the device. Please refer to the support
matrix.
Functions (NOT supported)
- For N8104-7133 a Wake On LAN is not supported
OutOfBox, from Standby, from Sleep, from Hibernation, from suspend or any
type of WOL
Cables (NOT supported)
- For N8104-7133 a cable with boots is not supported.
856-180496-001- A
Description
4
1
2
N8104-7138
1000BASE-T
Adapter
3
Side B
Side A
4
1
2
N8104-7132
Dual Port
1000BASE-T
Adapter
3
Side B
Side A
4
1
2
N8104-7133
Quad Port
1000BASE-T
Adapter
3
Side B
Side A
1. Bracket
This product has 2 type of bracket. By default, Low-profile type is attached. If
need to mount on Full-height PCI-EXPRESS slot, you can change to another
bracket. See "Bracket Replacement".
2. LAN Port
A connector provides to access a network. For the types of connectable
cables and how to connect, see "Network Cables". Port id is numbered from
"PORT1" to "PORT4". See the figure.
3. PCI-EXPRESS connector
This product conformed to PCI EXPRESS 2.0. Supported speed is 5GT/s
only. Each product has x4 lane edge. The logical lane size is as follows,
N8104-7132, N8104-7138
x1 lane
N8104-7133
x4 lane
This product can be installed to a slot more than x4 lane (or higher), and is
compliant with PCI-EXPRESS 2.0 (or higher) specifications.
Check the PCI-EXPRESS slot which can be attached with reference
NOTE:
to User's Guide of Express Server before attaching this product.
4. MAC Address
MAC address of port1 is printed on the label. For port 2 or later, you can get
by incrementing one to the address of the port1.
ACT/LINK
Lamp
ACT/LINK
1
N8104-138
N8104-132
N8104-133
Lamp
LINK/ACT
1
PORT1
SPEED
PORT1
Lamp
PORT2
SPEED
SPEED
Port ID
LINK/ACT
10=OFF
2
100=GRN
PORT3
1000=ORG
PORT2
PORT4
10=OFF
100=GRN
SPEED
1000=ORG
4
Lamp
Port ID
N8104-7138
N8104-7132
N8104-7133
Lamp
Lamp
Status (color)
Meaning
On (Orange)
Link at 1000Mbps speed.
SPEED
On (Green)
Link at 100Mbps speed
Off
Link at 10Mbps speed
On (Green)
Link is up
LINK /
Brink (Green)
Traffic
ACT
Off
Link is down
If the system is in sleep state, the lamp may does not display
NOTE:
correctly. Communications are not affected.
Network Cable
Connector
RJ45
Twisted Pair Cable( UTP / STP ) Must be 4pair wiring
Type
Make sure you use cable that complies with the TIA-568 wiring
specification.
10BASE-T: Cat.3 or better,
Cable
100BASETX : Cat.5 or better
Category
1000BASE-T Cat.5e or better
Length
100 m (max.)
Limitation of N8104-7133
Refer to the left
less than12mm
figure which does
get used to use for
11.58～11.79mm
the cable with boots
based on ISO standard.
(with a connector
The width of the root portion of a plug should
cover).
use the cable within 12mm.
* The cable with
boots
contact
cable boots
Hardware Installation / Uninstallation
For hardware installation/uninstallation, refer to the User's Guide of the server.
- When the system is up, please turn the power off after
shutdown process on the OS. and then unplug the AC power
IMPORTANT:
cord
- For rack-type server, before open the top cover, need to
disconnect the cable from this product.
Bracket replacement
Depending on the type of system, installation of this product requires either a
standard bracket or a low-profile bracket. NEC provides both of these brackets
with the product. By default low-profile bracket is attached. Please replace the
bracket according to the following steps as necessary.
N8104-7132, N8104-7138
Bracket
Screw
Replacement
Bracket
Side-B
(Different)
1
Remove the screw using a Philips screwdriver.
2
Remove a bracket from the adapter, Attache the different bracket.
Note: Keep the bracket was removed.
3
Fasten the screw using a Philips screwdriver.
N8104-7133
To remove a bracket
1
2
Remove the screw using a Philips
screwdriver.
3
Pull the bracket to outside, and remove it.
Note: Keep the bracket was removed
To attach a bracket
1
Align the projections on the connector with the holes in the bracket, attach the
brackets in the direction of the arrow(Orange).
hole
projection
causes
of
and
a
connector
2
3
Slide the bracket until it clicks .
Fasten the screw using a Philips
screwdriver.
Click
sound
Driver Installation / Uninstallation
To use this product, the appropriate LAN driver for your operating
system must be installed. For detailed information, please install a driver
with reference to the "ExpressBuilder" attached to the server.
Slide the bracket upward until it
get stuck. (approximately 5mm)
projection
6
Advertisement
