Names Of All The Parts - JVC HD-58DL8U Instructions Manual

Names of all the parts

Remote
control sensor
LAMP
indicator
Power lamp
ON: Lit (White)
OFF: Unlit
REC: Lit (P. 18)
To change the brightness of the
power lamp
"Illumination" (P. 22)
Power On / Off
Remove the terminal cover
Press to remove.
Connecting terminals on the back of the TV
"Connecting external devices"
(P. 9)
Check accessories
Remote control
(RM-C1906S)
"AAA/R03" Batteries
For confirming
the TV works
6
Change channel / page
Audio input
Volume
terminals
PC IN terminal
Display on-screen
menu / set
Video input terminal
Switch between
(S-Video, composite)
TV / AV devices
To headphones
(P. 9)
About the LAMP indicator
The LAMP indicator blinks as follows.
When turning on the TV, the LAMP indicator blinks for
about 1 minute every 2 seconds.
The lamp is warming up. During this period, the TV
cannot be turned off.
After turning off the TV, the LAMP indicator blinks in
orange for about 1 minute every 2 seconds.
Cooling is performed. During the cooling period, the
TV cannot be operated.
If the LAMP indicator blinks rapidly
"Lamp" (P. 31)
Insert the batteries
Use two "AAA/R03" dry cell batteries.
Insert the batteries from the - end, making sure the + and -
polarities are correct.
WARNING:
Batteries shall not be exposed to excessive
heat such as direct sunshine, fire or the like.
Mute
Channel information
(P. 13)
Colour buttons
Switch digital /
analogue channels
Volume
View teletext
(P. 15)
When watching digital
channels
(P. 13)
View the electronic programme
guide (EPG) (P. 14)
Switch TV / RADIO (P. 14)
View subtitles (P. 19)
Audio selection (P. 19)
When viewing teletext
(P. 15)
When choosing a favourite
channel (analogue channel)
(P. 16)
When operating a JVC
recorders or DVD
(P. 21)
Power On / Off
Change channel / page
Watch video, etc.
(P. 17)
Switch between "TV / VCR /
DVR / DVD / HC"
(P. 21)
Display on-screen menu
(P. 22)
Select and confirm settings in
menus
Change channel / page
To previous channel
When watching TV / Video
Change the aspect ratio (P. 19)
Turn on "3D Sound" (P. 19)
Take a snapshot of the
screen (P. 20)
View in multi-picture mode (P. 20)