Table of Contents
Advertisement
Troubleshooting
Analogue channels
Severe noise or
snow
Is the TV connected correctly to
the aerial?
Change the direction of the aerial.
Is the aerial or its cable
damaged?
Consult your retailer
Is the "Attenuator" set to "On"?
"Attenuator" (P. 22)
Patterns, stripes or
noise
Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
Consult your retailer
Are connected devices too close
to the TV?
Insert the minimum distance
between the aerial and the
cause of interference until no
interference
Ghosting
(Doubling of images)
Are you receiving interference
from signals reflected off
mountains or buildings?
Adjust the direction of your
aerial, or change to a
good-quality directional aerial
Digital channels
(P. 11)
30
I can't turn it on!
Is the power cord connected to the AC outlet
correctly?
The remote
control doesn't
work!
Are the batteries flat?
Are you more than 7 meters away
from the TV?
Is the "MODE (TV, VCR/DVR, DVD, HC)" set to "TV"?
When viewing teletext, the TV menu bar does not appear.
Depending on the stability of the signal, there may be a time
lag when changing channels.
Problem
Is the analogue channel reception poor, too?
Following the instructions in "Severe noise or snow" can
solve this problem (see left).
Not displayed
Digital channels are not displayed.
(black screen)
"When the TV cannot find the digital channels"
There may be problems at the aerial, radio waves, or the area
you live in, where reception is bad.
Consult your retailer.
Remote control
Unplug TV, several minutes later plug it in again.
stops working
Digital channel screen
Hold down "
is frozen
three or more seconds to restart.
Some functions do not
It is not a malfunction. Some functions (dark background) in
work
the menu do not work depending on the situation.
Front control buttons
Switch "Child Lock" to "Off."
do not work
Aspect ratio changes
Press "
unintentionally
PC screen alignment
Adjust the "PC Position".
is off
The screen is dim
Adjust the "Iris" brighter.
Although the HD-ILA element is manufactured with high-
Black or white dots
precision technology, please understand that some pixels
appear on the screen
may be lost or permanently displayed.
Adjust the "Bass" and "Treble".
Poor sound
If receiving a poor signal in "Stereo / t·u", switch to "Mono".
No sound from the
Audio signals received from EXT-5 and EXT-6 cannot be sent
audio component
to the "AUDIO OUT" terminal.
Actions
" and "
" on the TV simultaneously for
" to return to your settings.
page
11
–
–
–
–
20
22
19
17
22
–
22
22
–
Advertisement
Table of Contents
