Installation Notice; Fig. 4.5: Connection Of The R7101C Module To The R4320Cevb Evaluation Board - Caen RFID Lepton7x1 Technical Information Manual

Installation Notice

Fix the R7101C Lepton 7 x1/R7104C Lepton 7 x4 reader to the R4320CEVB board using 3 M2x12 countersunk
screws and 3 M2 screws nuts and connect the Molex connectors.
The reader case shall be kept electrically isolated via thermal sildpad from the ground plane.
The correct way to connect the R7101C Lepton 7 x1/R7104C Lepton 7 x4 module to the R4320CEVB
evaluation board is shown in the following picture:

Fig. 4.5: Connection of the R7101C module to the R4320CEVB evaluation board

7 7
EVALUATION BOARD - Lepton x1 - Lepton x4 - Technical Information Manual 22