Specifications - NEC AccuSync AS192 User Manual

Specifications

Monitor Specifications
LCD Module
Viewable Image Size: 48.2 cm/19.0 inches
Native Resolution (Pixel Count): 1280 x 1024
Input Signal 15pin Mini D-sub: Analog RGB
Display Colors Analog input: 16.7 M
Viewing Angle
Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz
Resolutions Supported Landscape: 720 x 400*
Active Display Area Horizontal: 376 mm
Power Supply
Current Rating
Power Maximun Operation: 25 W
Consumption Normal Operation: 19 W
Dimensions Landscape: 412.5 mm (W) x 403.1 mm (H) x 205.1 mm (D)
Weight
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Storage Temperature: -10°C to 60°C/14°F to 140°F
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
AccuSync AS192 Monitor
Diagonal: 48.2 cm/19.0 inches
Sync
DVI-D Digital RGB
Left/Right: -80°/+80° (CR>10)
Up/Down: -75°/+85° (CR>10)
Vertical: 56 Hz to 76 Hz
1
: VGA text
1
640 x 480* at 60 Hz to 75 Hz
800 x 600* 1 at 56 Hz to 75 Hz
832 x 624* 1 at 75 Hz
1024 x 768* 1 at 60 Hz to 75 Hz
1152 x 864* 1 at 75 Hz
1
1152 x 870* at 75 Hz
1
1280 x 960* at 60 Hz to 75 Hz
1280 x 1024* 1 at 60 Hz to 75 Hz..................optimal display performance.
Vertical: 301 mm
100 - 240 V ~ 50/60 Hz
0.55 - 0.3 A
16.2 inches (W) x 15.9 inches (H) x 8.1 inches (D)
3.4 kg (7.5 lbs)
Humidity: 20% to 80%
Altitude: 0 to 2,000 m/0 to 6,562 Feet
Humidity: 10% to 85%
Altitude: 0 to 12,192 m/0 to 40,000 Feet
Notes
Active matrix, thin film transistor (TFT)
liquid crystal display (LCD); 0.294 mm dot
pitch; 250 cd/m
contrast ratio, typical.
0.7 Vp-p/75 ohms
Separate sync. TTL level (Positive/Negative)
DVI(HDCP)
Depends on display card used.
Automatically
Automatically
Some systems may not support all
modes listed.
Recommended resolution is 60 Hz for
English-11
2 white luminance, 1000:1