Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Delta UNOlite
Summary of Contents for Delta UNOlite
- Page 1 User Manual VER 0.4...
- Page 2 Revision Date Version Description 2022/ 11 / 11 Initial Version 2022/ 11 / 12 Modified some typos 2022/ 12/ 27 Update missing icon, add APP direct link for China 2023/ 1 / 5 Add sensor notice...
-
Page 3: What's Included
Important Safeguards Please read the safety warnings before use and take the necessary precautions to reduce the risk of fire, electric shock, or injury. The Delta limited warranty applies only if the unit is used according to these instructions. WARNING!! ... -
Page 4: Getting Started
The UNOlite is a building-grade air quality monitor that can measure the ambient temperature / humidity / CO2 / PM1 / PM2.5 / PM10 / TVOC and provide multiple protocols for wired or wireless networks. Further information can be found on the UNOlite Resource https://isdweb.deltaww.com/resources/enter ①... -
Page 5: Externals And Air Flow
Externals and Air Flow Air is drawn into the UNOlite from the lower side, and there is natural air exchange on each side. It is vital that neither side of the device is covered. Any changes in airflow may affect the readings and accuracy. - Page 6 Status LED Indications: Standard operation Description Steady OFF Device’s power does not work Power Steady ON Device’s power is working normally Steady OFF No BLE connection Steady ON In BLE connection Flash rapidly In BLE binding process Steady OFF No Wi-Fi connection Wi-Fi Steady ON Wi-Fi connected...
-
Page 7: Installation
NOTE: The dips should be adjusted to proper position in the power off state. Adjust the dips, then power on the device. Installation The UNOlite can be mounted on a concrete block wall, drywall, ceiling, or to an electrical box. For detailed instructions on the installation, power, and connectivity setup, please visit our support center website at https://isdweb.deltaww.com/resources/... -
Page 8: Troubleshooting
Troubleshooting For frequently asked questions about the UNO series sensors, please visit the FAQ webpage at https://isdweb.deltaww.com/resources/faq/index.html or scan the QR code below. The product was calibrated in the factory, and no additional calibration is required. If a sensor value is affected by the environment at your site, please contact the distributor for manual calibration. - Page 9 For additional support, please contact your sales representative or email us at uno.service@deltaww.com...