Step 3: Install The Device; Install The Device Using A Lift - IBM J56S Getting Started Manual

IBM Ethernet Appliance J56S Getting Started Guide
Figure 3: Mounting Hardware for an Open-Frame Rack

Step 3: Install the Device

Because of the device's size and weight, we recommend you install the device using
a mechanical lift. The procedure for installing the device depends on whether you
use a mechanical lift:

Install the Device Using a Lift

1.
2.
8
Step 3: Install the Device
Install the Device Using a Lift on page 8
Install the Device Without a Mechanical Lift on page 10
Ensure the rack is in its permanent location and is secured to the building. Ensure
that the installation site allows adequate clearance for both airflow and
maintenance. For details, see the IBM Ethernet Appliance J56S Hardware Guide.
Load the device onto the lift, making sure it rests securely on the lift platform
(see Figure 4 on page 9).