Timer switch with remote control (neutral required) (5 pages)
Summary of Contents for iPuray BRT-782
Page 1
Front View and Back View: Fig. 1 and Fig. 2 show the front view and the back view of the BRT-782 speed control switch respectively. It has a rotary control unit on the right and a standard socket on the left. It comes with a power cord on the back.
Page 2
When BRT-782 rotary speed control switch is used as a wall mount unit, the power cord can be removed and the unit is directly wired to power lines. Please find Wiring and Installation instructions as follows.
Page 3
Fig. 3 BRT-780 Installation Guide Operation Guide: BRT-782 speed control switch is easy to operate. Once it is installed, plug the fan’s power cord to the socket of BRT-782. Turn on or turn off the fan and adjust fan speed: As shown in Fig.
Page 4
BRT-782 during initial installation. Turn on the fan and rotate the speed control knob to run the fan at the lowest speed. Then, rotate the fine-tune dial to obtain a minimum fan speed as desired.
Need help?
Do you have a question about the BRT-782 and is the answer not in the manual?
Questions and answers