Before Use - BestScope BS-2026 Series Instruction Manual

Before Use

1. Operation Notice
Fig.1
Fig.2
BestScope International Limited
1. As the microscope is a high precision
instrument, always operate it with care, and avoid
physical vibrations.
2. Do not expose the microscope in the sun
directly, either not in the high temperature, damp,
dust or acute shake. Make sure the worktable is
flat and horizontal.
3. When moving the microscope, keep holding the
rear cover hand clasp① and the front end of
microscope body② with each hand. Handle with
care. (See Fig. 1)
★ It will damage the microscope by holding the
stage, focusing knob or head when moving.
4. Connect the microscope to the ground to avoid
lightning strike.
5. For safety, make sure the power knob① is
rotated counterclockwise to the minimum before
replacing the bulb, and wait until the bulb and
base cool down completely (see Fig. 2).
★ Bulb selected only: single 5050 LED
6. Wide voltage range is supported as 100~240V.
Additional transformer is not necessary. Make
sure the power supply voltage is in this range.
7. Use the special wire supplied by our company.
2
BS-2026 Series