Features; Assembly - Ryobi RYi150C Operator's Manual

PRODUCT SPECIFICATIONS
Watts ................................................150 Watts Continuous
DC Input ............................................................18 Volts DC
AC Output ......................................... 120 Volts, 1.25 Amps
USB-A Fast Charge Ports
Output ................................... 5V(3A), 9V(2A), 12V(1.5A) DC
KNOW YOUR PRODUCT
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
120 V AC RECEPTACLE
Your product has one single phase, 60 Hz outlets that are
120 Volt AC, 15 Amp receptacle. This can be used for op-
erating appropriate appliances, electrical lighting, tools, and
motor loads.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

USB-C PD Port Input/Output ..... 5V(3A), 9V(3A), 12V(2.5A),
AC Output Wave Form ........................ Modified Sine Wave
LED TASK LIGHT
The LED task light can be used to provide general illumina-
tion for most work spaces.
POWER BUTTON
The power button is used to turn the power source on and
off. When turned on, power is available at the USB ports
and to the LED task light.
USB PORTS
This product has two USB-A 5V(3A), 9V(2A), 12V(1.5A) and
one USB-C 5V(3A), 9V(3A), 12V(2.5A), 15V(2A), 20V(1.5A)
charging ports that will charge most USB-compatible
devices.

ASSEMBLY

PACKING LIST
Power Source
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
5 — English
15V(2A), 20V(1.5A) DC