Features; Assembly - Ryobi P118 Operator's Manual

18 volt dual chemistry battery charger
Table of Contents

Advertisement

Available languages

Available languages

PRODUCT SPECIFICATIONS
Battery Pack Voltage ................................................................................................................................................. 18 V DC
Charger Input........................................................................................................................................ 120 V, AC only, 60 Hz
Charge Time ....................................................................................................................................................Approx. 1 hour
NOTE: Charge time is dependent on the type of battery pack.
KNOW YOUR CHARGER
See Figure 1, page 9.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
CORD WRAP
The cord wrap area keeps the cord neatly in place when the
charger is mounted on the wall or is being stored.
DIAGNOSTIC FEEDBACK
LEDs provide feedback to indicate whether the battery pack
is charging, fully charged, or defective.
DUAL CHEMISTRY
The battery charger can charge either lithium-ion or nickel-
cadmium batteries.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

ENERGY SAVE MODE
Energy Star
when not charging or when maintaining batteries. This al-
lows the charger to conserve energy by charging batteries
only as needed, and also protects the cells and maximizes
the life of your batteries.
ENERGY STAR
This battery charger meets the Energy Star
guidelines set by the U.S. Environmental Protection Agency
and the U.S. Department of Energy. Battery chargers meet-
ing this standard use an average of 35% less energy than
conventional battery chargers.
KEY HOLE HANGER
The charger has a key hole hanging feature for convenient,
space saving storage. Screws should be installed so that
the center distance is 4-1/2 in.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
4 — English
qualified systems enter Energy Save Mode
®
QUALIFIED
®
energy- efficiency
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents