Features; Assembly - Ryobi P110 Operator's Manual

PRODUCT SPECIFICATIONS
Battery Pack Voltage ..........................................18 Volt DC
Charger Input.................................... 120 V, 60 Hz, AC only
KNOW yOUR CHARGER
See Figure 1, page 8.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
THERMAL PROTECTION
Battery thermal protection system prevents charging batteries
that are too hot, which would cause damage to the battery
and a loss of run-time.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the charger and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the charger carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Charger
Operator's Manual

FEATURES

Charge Rate ............................................................. 1 hour
Cord Length ..................................................................6 ft.
ONBOARD DIAGNOSTICS
Diagnostic lights to indicate charging and battery condi-
tion.

ASSEMBLy

WARNING:
If any parts are missing or damaged do not operate this
tool until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
5 - English