Table of Contents
Advertisement
All wiring connections to the fan assembly are made at the fan-mounted electrical box.
These are a 20 ft, black, factory-installed power cord, a 10 foot actuator power harness and three RJ45
("Ethernet") ports for connecting the fan controls and accessories (see below) Color Match Cable and Jack
Identification
Note: The "WEB" port is not available yet but can be upgraded at a later time.
PURCHASE OPTIONS
A wireless remote is an available
part of this fan's standard control package. The yellow manual included with these accessories provides specific
instructions for the installation and operation of the remote. If purchased, the wireless remote receiver is
connected to the fan-mounted electrical box at the blue RMT RJ45 port. (see above)
A Web Node is another option not included in the standard WHF package. This will allow you to control your fan
using your mobile phone or tablet or home automation device through a web page or an app. The Web Node
comes with a white cable and connects the Web Node to the WEB port. (see above) The yellow manual included
with these accessories provides specific instructions for the installation and operation of the Web Node. Note:
The "WEB" port is not available yet but can be upgraded at a later time.
Furthermore several modules are available, specifically designed for the Air Handler 2 Series Cabinet Fan
1.866.448.4187
(call for details
- a V-Bank Filter Box Module (AH2-FB)
- an Air Inlet Selector (AH2-AIS)
- a Hot Water Coil Box (AH2-CB)
- Air Handler Duct Adapters for Intake and Exhaust
© AirScape CF1600 / CF1900 Cabinet Fan-IOM, January 2023, All Rights Reserved.
accessory option
for this fan. The wireless remote is NOT included as
):
Red 30 Feet CAT5
Shielded Ethernet Cable
connect to W/S and DTC
Blue 5 foot CAT5
shielded Ethernet Cable
connect to RMT and
Receiver. (Optional NOT
included)
20 foot Power Cable
connect to Wall Outlet
6
Advertisement
Table of Contents
