Using Your Induction Cooktop; To Start Cooking - Haier HCI604TG3 Instruction Manual

Using your Induction Cooktop

To start cooking

1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
" – " or " – – ", indicating that the cooktop has entered
into standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touch the heating zone selection control, and
the indicator next to the key will flash.
4. Set a power level by touching the "-" or "+" control or slide along the slider.
a. If you don't select a heat zone within 1 minute, the cooktop will
automatically switch off. You will need to start again at step 1.
b. You can modify the heat setting at any time during cooking.
If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
Or
alternately with the heat