Correct Use Of The Machine; Unpacking And Preparation - Caravaggi Bio 90 Use And Maintenance Instruction Manual

3. CORRECT USE OF THE MACHINE

The machine must be run by one operator only .
The operator must be have read and fully understood the instructions
in this manual in order to use the machine correctly .
The operator must be ensure that person or animals do not come
within the field of action while the machine is running .
The Caravaggi company's Bio 90 bio-chopper has been built to chop
vegetables , foliage and natural wood of the dimensions indicated in
the relevant section .
It may be used for cutting peat and similar .
It is not suitable for chopping products other than those listed above.
To work with other products , contact the machine manufactures or
authorised dealers .
The operator must be aware of all the instructions given in the
instruction manual .

4. UNPACKING AND PREPARATION

The Bio 90 bio-shredder is delivered partially dismantled. It ca be arranged
on pallets to facilitate handling and transport before installation, depending
on the versions.
To transport the machine in these conditions it is indispensable to
use a transpallet or similar with a load capacity of around 150 kilos .
Avoid :
•
hoisting the bio-chopper with ropes or unsuitable hoists ;
•
dragging the bio-chopper ;
•
bumps or shocks ;
•
exposing the machine to rain , frost or any bad weather .
On taking delivery check that the contents correspond with the
delivery note .
Should damage or deformity due to transport be noted , make an
immediate compliant to the carrier and advise the authorised dealer
or the manufacturer . In particular , check that :
•
there are no dents , signs of bumps or deformations ;
•
there are no damp areas or signs the may lead to suppose that
the pack has been exposed to foul weather ;
•
there are no signs of tampering ;
After checking that transport has been carried out correctly , proceed
to assembling the machine as shown in figures 3 - 4 - 5 .