Programming Worksheet - Alpha Communications TekTone Tek-ENTRY Operation, Installation And Service Manual

®
Tek-ENTRY Programming Worksheet ——————————–
Building Address: ___________________________________________________________________________
___________________________________________________________________________
Date of Installation: ___________________________________________________________________________
Installation Company: ___________________________________________________________________________
___________________________________________________________________________
Programming Instructions:
A. Enter "*" and the three-digit Master Code (see #3 below) on the keypad to access the programming menu.
B. Press the "1" key to scroll up, or press the "3" key to scroll down the menu screen to the desired function.
C. Press the "#" key to select the desired function when it is displayed on the screen.
D. Follow the displayed instructions to make the necessary changes.
E. Press the "*" key twice to end program mode.
Factory Default Programming:
Function
1. Tenant Dial Codes
2. Keyless Entry Codes
3. Master Code
4. Door Open Time
5. Talk Time
6. Night Service On/Off
Off-Premises Dialing
Dial Code
1. __ __ __ __
2. __ __ __ __
3. __ __ __ __
4. __ __ __ __
5. __ __ __ __
Copyright © TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
Factory Default
Blank (4 digits)
Blank (4 digits)
* 1 2 3
10 Seconds
60 Seconds
* 4 5 6
Telephone Number
__ ( __ __ __ ) __ __ __ – __ __ __ __
__ ( __ __ __ ) __ __ __ – __ __ __ __
__ ( __ __ __ ) __ __ __ – __ __ __ __
__ ( __ __ __ ) __ __ __ – __ __ __ __
__ ( __ __ __ ) __ __ __ – __ __ __ __
Programmed
See Directory Worksheet
See Directory Worksheet
* __ __ __
__ __ (0-99 sec)
__ __ (0–99 sec)
Fixed
Name
_____________________________
_____________________________
_____________________________
_____________________________
_____________________________
®
IL574 Tek-ENTRY No-Phone-Line Version Manual • 15