Steris SYSTEM 1 endo Operator's Manual page 35

STEP 3
INSERT ASPIRATOR PROBE
Line up the tip of the aspirator probe over the center of the sterilant container lid.
Insert the probe in a downward motion until the top of the aspirator is resting
on the lid of the container.
ASPIRATOR PROBE ASSEMBLY IN THE CORRECT POSITION
The illustration below shows the correct position of the aspirator probe assembly.
ENSURE TUBING IS NOT KINKED.
7-3
Operation of the Processor Operator Manual T6800 Rev B
SYSTEM 1 endo Liquid Chemical Sterilant Processing System