Basic Functions; Led Functions For The Sackit Speak 200 Case; Troubleshooting - SACKit Speak 200 User Manual

BASIC FUNCTIONS

Left earbud
• Volume down - 1 tap
• Previous song - Press for 1 sec
• Play / pause - 2 taps
• Take the call - 1 tap
• End the call - 2 taps
• SIRI®/Google™ - 3 taps
• ANC On / VoiceThrough On / VoiceTh-
rough Off - Press for 2 sec to switch

LED FUNCTIONS FOR THE SACKIT SPEAK 200 CASE

When earbuds charge in the case
• Left LED flashes: "L" earbud charges
• Left LED lights up: "L" earbud is charged
• Right LED flashes: "R" earbud charges
• Right LED lights up: "R" earbud is charged

TROUBLESHOOTING

If you experience problems with stability or connection, try resetting the SACKit Speak 200. When
resetting, SACKit Speak 200 will forget all previous connected Bluetooth devices.
• Put earbuds in the charging box while they are turned on. Hold the lid open and press the button
at the bottom of the charging case for 10 seconds
• If the reset works, all 4 LED's on the case will flash at the same time and then light constantly for
3 seconds after that.
• If the reset does not work, all 4 LED's will flash 10 times.
• Now connect your SACKit Speak 200 to your Bluetooth device.
Right earbud
• Volume up - 1 tap
• Next song - Press for 1 sec
• Play / pause - 2 taps
• Tale the call - 1 tap
• End the call - 2 taps
• SIRI®/Google™ - 3 taps
• ANC On / VoiceThrough On / VoiceTh-
rough Off - Press for 2 sec to switch
When the casse charges with plug / wireless
• 1st LED flashes: 0-25% charged
• 2nd LED flashes: 25-50% charged
• 3rd LED flashes: 50-75% charged
• 4th LED flashes: 75-100% charged
• Press the button at the bottom of the char-
ging case to see the battery status.
7