Summary of Contents for cecotec CONGA POPSTAR 7000 MATTRESS
Page 1
C ON GA P O PST AR 7000 MATTRESS Mattress vacuum cleaner with UV light and motorised brush Instruction manual...
Page 2
INDEX 1. Parts and components 2. Before use 3. Operation 4. Cleaning and maintenance 5. Troubleshooting 6. Technical specifications 7. Disposal of old electrical appliances 8. Technical support and warranty...
SAFETY INSTRUCTIONS Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users. All safety instructions should be closely followed when using the appliance. - Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the outlet is grounded.
Page 4
- Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec, in order to avoid any type of danger. - Do not move the product or pull from it from its cord. Do not use the cable as handle.
Page 5
outdoors. - No liability is accepted for any eventual damage or personal injuries derived from misuse or non-compliance with this instruction manual. - The appliance is not intended to be used by children under the age of 8. It can be used by children over the age of 8, as long as they are given continuous supervision.
Do not use the appliance if the device or its cord have been damaged or are not working properly. In case of damage, contact the official Technical Support Service of Cecotec for advice, repairs, or returns. Make sure all components are included in the package.
Full cleaning mode: Vacuuming, Brush rotation & Mite removal Turn the device on. It will run under Full cleaning mode (Vacuuming, Patting & Mite removal with UV-C light) by default. The corresponding light indicator will turn on. Press the On/Off button once to turn the device off. Vacuuming &...
Page 8
UV penetration ability is weak. Any paper, glass and plastic will greatly reduce the intensity of ultraviolet radiation. Therefore, dust and oil stains on the lamp tube will directly affect its penetrating ability. UV lamps shall be cleaned regularly to avoid affecting UV transmittance and intensity.
5. TROUBLESHOOTING Problem Possible causes Solutions The power plug is not inserted Check if the power plug is tightly. inserted tightly. The machine does not work. The power socket has no Check the socket. electricity. The on/off button is not pressed. Press the on/off button.
6. TECHNICAL SPECIFICATIONS Product: Conga PopStar 7000 Mattress Product reference: 05568 Rated voltage: 220-240 V~ Rated frequency: 50 Hz Rated power: 700 W Dust tank capacity: 0.35L Made in China | Designed in Spain 7.
In the event of misuse, the warranty will not apply. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
Need help?
Do you have a question about the CONGA POPSTAR 7000 MATTRESS and is the answer not in the manual?
Questions and answers