5 Using your pump
Before using the pump
Wash your hands thoroughly, and make
•
sure your breasts are clean. Gently
squeeze a little milk from each nipple
to make sure that milk ducts are not
blocked.
Make sure you follow the steps
•
in "Cleaning and sterilising" and
"Assembling" chapters to clean, sterilise,
and assemble the breast pump.
Relax in a comfortable chair, leaning
•
slightly forward (use cushions to support
your back). Make sure that you have a
glass of water nearby.
To begin pumping
1
Press the assembled pump bodies
against your breasts. Make sure that
your nipples are centered, so that the
massage cushion creates an airtight
seal. Make sure that no air escapes;
otherwise there is no suction.
2
Press the power button (
2 seconds to switch on your pump.
» The display panel lights up with
» You begin to feel the suction on
The timer starts when the appliance is
•
power on. The display shows 01 after
the appliance has been switched on for
1 minute. The unit is minute.
The display will show the total breast
•
pumping time, pause time does not
count in.
If the timer on the display is more than
•
99 minutes (when it comes to 100
minutes), the appliance will flash twice
and shut down automatically.
- 10 -
2s
HI. The breast pump automatically
starts up in stimulation level 1
mode in the first time usage, and
the stimulation indicator lights up.
The appliance has the memory
function to remember the levels
for both stimulation and expression
mode in your latest usage.
your breasts.
Note
) for