Wiegand Connector Side View - Sony XCI-NPR Technical Manual

Wiegand Connector Side View

The position of the channel determines if the camera is working in Wiegand output of with an RS232 output.
6
(TX) DATA 0
If WIEG channel is selected it correspond to the DATA 0 pin.
If RS232 channel is selected it correspond to the TX pin.
Note.
See below "Channel Selection".
7
(RX) DATA 1
If WIEG channel is selected it correspond to the DATA 1 pin.
If RS232 channel is selected it correspond to the RX pin.
Note.
See below "Channel Selection".
8
GROUND
9
- ALARM OUT 1
Relay 1 input
10
+ ALARM OUT 1
Relay 1 input
11
- ALARM OUT 2
Relay 2 input
12
+ ALARM OUT 2
Relay 2 input
6 (TX) DATA 0
7
(RX) DATA 1
8
GROUND
9
- ALARM OUT 1
10 + ALARM OUT 1
11
- ALARM OUT 2
12 + ALARM OUT 2
Page 9 / 42