Multitech RouteFinder RF560VPN Reference Manual page 2

RF760VPN / RF660VPN / RF600VPN
Tunnel Examples in Manual Mode
Copyright © 2003-2005
This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-
Tech Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or warranty with respect
to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular
purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes
from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes.
Reference Guide Number: S000308D
Revision Date
A 07/02/03
B 08/19/03
C 03/19/04
D 11/17/04 & 01/25/05 Changes for software 3.20 and 3.21
The examples on the following pages illustrate:
RF760VPN / RF660VPN / RF600VPN connected to another RF760VPN / RF660VPN / RF600VPN
1.
through a VPN tunnel configured for Manual Mode.
RF760VPN / RF660VPN / RF600VPN, behind a NAT box, doing IPSec Pass-Through in Manual Mode
2.
to another RF760VPN / RF660VPN / RF600VPN.
The RouteFinder software is pre-installed on the RF760VPN, RF660VPN, and RF600VPN RouteFinders. The
RouteFinders use the same software, version 3.21. Initial configuration is required in order for you to run the
RouteFinder software and begin operation.
The browser-based interface eases VPN configuration and management. The VPN functionality is based on IPSec
and PPTP protocols and uses 168-bit Triple DES encryption to ensure that your information remains private.
IMPORTANT:
Caution: Use a safe Password! Your first name spelled backwards is not a sufficiently safe password; a password
such as xfT35$4 is better.
Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D)
Description
Initial release
Added RF560VPN
Changed to document the RF760VPN/RF660VPN/RF600VPN only
Copyright and Introduction
2