Subscribe to Our Youtube Channel
Related Manuals for Anton/Bauer VCLX NM2
Summary of Contents for Anton/Bauer VCLX NM2
- Page 1 VCLX NM2 600 Wh free-standing battery Publication date 12/05/2022 Part No. 8675-0174 Publication Part No. 86750174-4980/1...
-
Page 2: Table Of Contents
Table of Contents Copyright ..............................3 Safety . -
Page 3: Copyright
Copyright Copyright All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of Videndum plc. -
Page 4: Safety
Safety Safety Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these CAUTION instructions. Do not operate the product if you do not understand how to use it safely. Do not exceed the current output limit of the product when Save these instructions for future reference. - Page 5 DANGER don't formally have an IP rating, so this is a bit of a catch all. The VCLX NM2 Battery can only be charged with the VCLX NM2 charger. Do not attempt to charge on non-InterActive chargers or chargers not manufactured by Anton/Bauer.
- Page 6 Safety Storage CAUTION Sustained elevated temperatures are the primary reason for premature failure of Nickel-metal hydride batteries. CAUTION Charge batteries at room temperature. In warm climates keep chargers in air conditioned rooms for best performance. CAUTION Although Nickel-metal hydride has good self discharge characteristics, batteries should be stored for long term storage in a fully charged condition.
-
Page 7: How To Setup Wifi
NOTE Your Information will not be saved and all password details To use the Wifi Module in the VCLX NM2, you will need to create a config file which are fully encrypted. contains your WiFi information, as well as FTP details for your report upload. Follow these steps to generate the file and load into you VCLX NM2. - Page 8 How to setup WiFi You will receive information about the SSID which the battery is connected to, as well as the FTP Server info. The WiFi Info screens also shows the last Sync informations and the current WiFi status. To go back to the advanced setting menu, press the back button...
-
Page 9: Generate Reports
Generate Reports Generate Reports The VCLX NM2 can generate reports about the health status of the battery. If you use the Now navigate to the "Generate Now" button and confirm with the enter button Wifi settings [7], a report will be generated every four weeks and uploaded to your FTP And your report will be generated. -
Page 10: Declarations
UK Declaration of Conformity This equipment has been approved by one or more agencies. All changes and/or modifications not expressly approved by Anton/Bauer could void the users’ warranty and Videndum Production Solutions Ltd. declares under our sole responsibility that the product detailed in this manual conforms with all relevant provisions of the following UK Regulations: authority to operate this equipment.
Need help?
Do you have a question about the VCLX NM2 and is the answer not in the manual?
Questions and answers