Mocka Darby Change Table Manual

Darby Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
8 x
bolt metal dowel
Hardware Supplied
D E
1x 1x
screw wall screw washer
Wall Strap
Phillips screwdriver required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
B C
1x
8 x
allen key
F G H
2x 1x 1x
wall anchor wall strap
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wal
materials may require different fixing devices from those supplied.
1