Wells H-70EU Operation Manual page 2

WARNING!
The following warnings and instructions must be observed for proper installation and operation of
the equipment.
WARNINGS!
IMPORTANT! (BUILT-IN APPLIANCES)
•
All electrical connections must be done by a licensed electrician.
•
An approved all pole power disconnect switch, with at least 3mm contact gap, must be
supplied and installed in the fixed wiring in an accessible location (close proximity to the
appliance) by a licensed electrician. Refer to equipment name plate for electrical ratings.
CAUTION!
•
Do not submerge counter top appliances in water.
•
Do not splash or pour water onto control panels or wiring. This appliance is not jet stream
approved. Do not clean with water jet.
CAUTION!
•
Do not store any combustible materials or flammable liquids anywhere near the appliance.
CAUTION HOT SURFACE!
•
Exposed surface is HOT to the touch and may cause serious burns.
IMPORTANT!
•
Counter top appliances must be positioned so the plug is easily accessible.
•
Wells hotplates are designed to prepare food for human consumption.
•
Appliance must be disconnected from main power supply when not in use for extended periods
of time.
•
For built-in units: turn installed power disconnect switch to the off ("O") position.
•
For counter top units: remove power cord plug from power outlet.
•
Counter top appliances must be operated with all four legs installed and the unit leveled.
Hand tighten legs to appliance base.
•
All repairs and servicing must be performed by a factory authorized service agent.
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance, and is to be given to owner or manager of the
restaurant, or to the person responsible for training operators of this appliance. Additional manuals are
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING
Contact your Wells dealer if you have any questions concerning installation, operation or
available from your Wells dealer.
OR INSTALLING THIS APPLIANCE.
maintenance of this appliance.
2