Table of Contents
Advertisement
AT&ZIr=n*m*p
AT&ZI?
AT&ZIr?
AT&Z0=nnnn
AT&ZOr=n*m
AT&ZO?
AT&ZOr?
AT&Zr=n*m
AT&Zr?
AT#C
AT#C?
AT#C0
AT#C1
AT#C2
AT#Tn=m
AT#T0=0
AT#T0=1
AT#T1=0
AT#T1=1
30
Set the called party number for screening incoming call
(MSN). "n" is the local telephone number, "*" is the sub
address symbol (option), if needed, "m" is the sub address
(option). The second "*" is option. If needed, the p is the
protocol indicator.
P = 0 for accepting all protocols with auto-detection
(default)
= 1 for receiving V.110 protocol only (option)
= 2 for receiving V.120 protocol only
= 3 for receiving X.75 Transparent only
= 4 for receiving X.75 T.70NL only
= 5
for receiving X.75 EFT (Euro File
Transfer)only
= 6 for receiving HDLC (such as PPP ¡ K ) only
Where the r=0,1, to 5, the 0 for POTS 1, 1 for POTS 2, and
2 to 5 for DATA port. The maximum length of MSN is 18
digits and 8 digits for subaddress.
For example, if you want to set a MSN with a specific
protocol (X.75 Transparent) for incoming call, you may
enter
this
command
subaddress).
Display the setting values, r=0,1,2 to 5
This command is auto-dial for DTR signal function
save telephone number, nnnn is the telephone number you
want to auto-dial out.
Set the calling party number for outgoing call.
local telephone number, "*" is the sub address symbol, if
needed (option), and "m" is the sub address (option).
Where the r=0,1,2, the 0 for POTS 1, 1 for POTS 2, and 2
for DATA port.
Display the setting values, r=0,1,2
Save telephone number, r=0, 1 for DTR dialing
Where 'n' is telephone number, '*' is the sub address
symbol, if needed (option) then 'm' is the subaddress, the
maximum length of n is 18 digits and 8 digits for
subaddress.
Where r=0,1 , display current saved telephone number 0,1
Caller ID setting
Display the current Caller ID mode
Disable Caller ID (default)
Enable Caller ID
Enable to display CallerID; CallerSub; CIP; CalledID;
CalledSub
Disable ringing function if MSN field empty
Disable to ring the analog device connected to POTS1
when there is no called party number in incoming call
Ring the analog device connected to POTS1 when there is
no called party number in the incoming call. (default)
Disable to ring the analog device connected to POTS2
when there is no called party number in incoming call.
Ring the analog device connected to POTS2 when there is
no called party number in the Incoming call. (default)
© COPYRIGHT OF ASUSCOM NETWORK INC.
as
AT&ZI2=81722043**3
(no
"n" is the
Advertisement
Table of Contents
