TA-200 installation diskette. Select the mdmasuta.inf file.
3) Select the modem type that you require from the list shown (as described below)
and then click on Next, link this modem to the Com port which connects to TA-
200 terminal adapter.
4) After you install the desired modem, select the virtual modem in the RAS
Capable Devices field. Click "OK".
5) Select this virtual modem and click the Configure Tab to set the parameter (Port
Usage) to this ISDN1port for "Dial out only", "Receive calls only", or "Dial out
and Receive calls" then click OK.
© COPYRIGHT OF ASUSCOM NETWORK INC.
19