Correcting The Reticle; Show System Information - Leica CALONOX SIGHT SE Instruction Manual

EN

CORRECTING THE RETICLE -

The display section (Clip-on mode) for the reticle of the rifle scope
must be shifted to align Calonox Sight SE with the point of impact.
Accessing reticle correction
▸ Select
Reticle correction
• The reticle correction mode appears.
Making the correction
▸ Move the display section so that the point of impact of the rifle
with the rifle scope matches the point of impact of the rifle with
rifle scope and Calonox Sight SE.
Attention
• Determine and correct the point of impact exclusively on the
shooting range with live ammunition.
28
in the list menu
Controls
Select an active axis /
switch between X and Y axis
To the right/up
To the left/down
To the right/up (quick)
To the left/down (quick)
Exit
Save

SHOW SYSTEM INFORMATION -

Various types of device information are available under the menu
item .
System information
Press the menu selection
button briefly
Press the button briefly
[+]
Press the button briefly
[-]
Press and hold the button
[+]
Press and hold the button
[-]
Press and hold the menu
selection button
Press and hold the button
[+]
The device switches off.