Correcting Pixel Errors - Leica CALONOX SIGHT SE Instruction Manual

CORRECTING PIXEL ERRORS -

Pixel errors may occur on the screen from time to time. These can
be selected and corrected using a special mode.
Accessing the pixel correction mode
▸ Select
Pixels defect correction
• A cross-hair pointer appears in the screen image to indicate
the current position, and operating instructions are displayed
in the header line.
in the list menu
Selecting a faulty pixel
▸ Place the cross-hair pointer directly over the faulty pixel
Controlling the cross-hair pointer
Select an active axis /
switch between X and Y axis
To the right/up
To the left/down
To the right/up (quick)
To the left/down (quick)
Marking defective pixels
▸ Press and hold the and
[+] [-]
• A status bar with the number of marked pixels appears in the
status bar for confirmation.
Storing marked pixels
▸ Press and hold the menu selection button
• A menu to save the pixels or to exit the mode will appear.
Press the menu selection
button briefly
Press the button briefly
[+]
Press the button briefly
[-]
Press and hold the button
[+]
Press and hold the button
[-]
button simultaneously
EN
27